所属分类: 测量和测量设备
SK高精度数字水平限制DL-S4W系列不锈钢基础无线内置0.001mm/m
水平 DL-S4W SUS

SK高精度数字水平限制DL-S4W系列不锈钢基础无线内置0.001mm/m 水平 DL-S4W SUS

品牌: Niigata Seiki

联系我们

18866622123 张工 13310663713 吴工
ahy@qdahy.com
AHY97319570
微信二维码

扫码联系我们

产品详情

特征

  • 这种不锈钢基本模型具有高精度数字水平,分辨率为0.001mm/m,消除了防锈治疗。
  • The DL-S series has the following features: "DL-S3: Standard type with display on the main unit screen", "DL-S2W: No display on the main unit screen, built-in wireless output function type", "DL-S4W: Display on the main unit screen, built-in wireless output function type", "DL-SXY: 2-axis measurement type"
  • Includes an inspection chart to guarantee performance.
  • 测量值显示在主单元上,因此可以直接读取数字。
  • 可以无线传输测量数据。
  • 接收器和显示软件允许 在计算机上显示测量号并记录数据。
  • 可以在无线和有线之间切换,节省能量并增加使用时间。
  • 驱动程序将通过使用USB接收器单元插入来自动设置驱动程序。
  • 它带有两个可充电电池,因此即使在充电时也可以停止工作。
  • 底部有一个螺丝孔,因此 可以连接特殊的基座和夹具。
功能

  • 用于表面板,机床等的高精度水平化,直度和平坦度测量。
使用端

  • ●显示DEG(°)时,将不会显示小数点上方0s。
  • ●0.001mm/m和0.0001°的 小阅读范围为±1.999mm/m,±0.1145°或更少。
  • ●%rdg是阅读的百分比。
  • ●连续使用时间约为12小时的锰电池(使用无线时约3小时),使用碱性电池约30小时(无线使用时约10小时),而大约10小时的可充电电池(大约无线电池时约4小时)。
  • ●如果 使用的是没有RS-232C的计算机,请准备单 的USB串行转换设备。蓝牙系统由TELEC(日本),FCC( ),CE(EU)和KCC(韩国)认证。
注意

产品规格

规格和标准

测量范围(mm/m,°):±5.00,±0.286
小读数1(mm/m,°):0.001,0.0001,0.0001
小读数2(mm/m,°,°,°):0.01,0.001,0.001,0.001
读取准确性条件1(较大rdg)<0.85(%rdg)<0.85(较大<0.85) (%rdg): ±1.0
Read accuracy condition 3 (%rdg): ±2.6 (larger than repeating accuracy)
Read accuracy condition 4 (%rdg): ± 2.7 Repetition accuracy (mm/m, °): ±0.005, ±0.0003 Within Power supply: 1 x 9V square dry battery, 1 x 8.4V006P type rechargeable battery, included AC adapter Body base dimensions (mm): L150xW55 Length (mm): 158 Width (mm): 61 Thickness (mm): 107 Sensitivity (mm): 0.001mm/m Accuracy: ● Reading accuracy condition 1 (%rdg): ±0.85 (large compared to repeating accuracy * Repeatability: ±0.005mm/m, within ±0.0003° Power supply: 1 x 9V006P type dry battery, 1 x 8.4V006P type rechargeable battery, included AC adapter Sensitivity (mm/lm): 0.001mm/m Measurement range (mm/m, °): ±5.00, ±0.286 Minimum reading value 1 (mm/m, °): 0.001, 0.0001 Minimum reading value 2 (mm/m, °): 0.01, 0.001 Reading accuracy condition 1 (%r dg): ±0.85 Reading accuracy condition 2 (%rdg): ±1.0 Reading accuracy condition 3 (%rdg): ±2.6 Reading accuracy condition 4 (%rdg): ±2.7 Repeatability (mm/m, °): ±0.005, ±0.0003 Within body base dimensions (mm): L150xW55 Bottom screw hole dimensions: M5xP0.8 Power supply (v):1 x 9v006p干电池,1 x 8.4v006p可充电电池,包括交流适配器

材料

身体:铝
基本部分:不锈钢

质量/质量单位

2000g

● 小阅读值1:在±1.999mm/m● 低阅读值2:超过±2mm/m●阅读精度条件1:工作温度17-23℃(±1.999mm/m)●读取准确性条件2:读取精度2:工作温度17-23℃(±2mm/m或更多)(±2mm/m mmm或mm n ymm 9:9米9:1.操作温度3:1. 1. 1.±40-40-0-40-40-40/± ●阅读准确性条件4:工作温度0-40℃(±2mm/m或更多)●外部信号输出(有线):RS-232C符合RS-232C●外部信号输出(内置无线):蓝牙1类,通信距离30-50m●底部螺纹孔尺寸:M5XP0.8

>
和配件

●保证,说明手册,检查报告卡
●存储案例
●AC适配器(DC9V输出,AC100V-240V)
●8.4V006P键入可充电电池键x 2

日本
小盒子计数 1个单位

-
    -
    -
标准
    -